Here’s a worthwhile read about radio errors, by John Zimmerman, at studentpilotnews.com.
The issues raised in this article are just as prevalent today as they were when this article was written in 2012. Enjoy, or read it and weep, depending on your perspective.
http://studentpilotnews.com/2012/05/09/the-7-deadly-sins-of-radio-communications/
"New day, new jet." That is an Air Force Instructor Pilot's standard statement that means the current training scenario is over, and a new one has begun. It is a line of demarcation that reminds student pilots it is time to move on to the next challenging scenario. It's a new day here at ATCcommunication.com,
If you are anticipating flying into Class B airspace for the first time, not to worry. The procedures ATC uses inside of Class B are nearly identical to those used in other classes of airspace. The subtle variations in procedure will most likely be unnoticeable to you. What may jump out at you is the
As you approach your destination, ATC will clear you to begin a descent from your enroute altitude to some lower altitude. Often descent clearances will come in a series of lower altitudes. This series of step-down clearances is issued to allow you to descend without conflicting with other traffic at lower altitudes. Occasionally, and in
No one likes to have their forward progress stopped. You know what I mean. When you are stuck in a traffic jam on the road, it’s very aggravating. Waiting at a long red stoplight when you need to be somewhere can raise your blood pressure. Similarly, when ATC says, “Expect holding at [a navigation fix],”
The time between ATC’s radio transmissions differs depending on the amount of traffic in a controller’s airspace. The more traffic in a section of airspace, the less time between ATC transmissions. Take comfort in the fact that no matter how busy the radio seems, the words and phrases ATC uses remain exactly the same words
